This logon is necessary by the first user of the day. It may be necessary after system outages.
On a clear screen with the cursor approximately two inches below the left corner:
1. Key the letters LOGON IMSB.
2. Press the ENTER key.
One of the following messages should appear on the terminal:
1. |
TERMINAL CONNECTED - You have successfully logged on to IMS. |
2. |
COMMAND UNRECOGNIZED - You have misspelled IMS. Try again. |
3. |
NO SUCH TRANSACTION CODE - The terminal has been logged on to IMS already. |
4. |
IMS PROCEEDING - Will generally occur prior to TERMINAL CONNECTED. If no additional messages appear within 1 minute, call IBM Operations for assistance. |
5. |
APPLICATION INACTIVE - IMS is not operating. Call IBM Operations for assistance. |
Once a terminal has logged on to IMS, it will require no further IMS logon under normal circumstances. However, it may be necessary to logon again if the terminal is turned off, or if either JAI or IMS are shut down.
Immediately after the TERMINAL CONNECTED message appears, press the print key to verify your printer is connected to the computer. This is to verify that you will receive Broadcasts, the Alert/Late List, and the Probation Calendar. Then press the PA2 and CLEAR keys one or more times to clear backlogged "messages." Continue alternately pressing these keys until the result of pressing PA2 is a blank screen. Clearing messages in this manner will improve response time.
1. Type /FOR LOGON
2. Press the ENTER key
3. The security logon screen will appear as below:
*******************************************************************
|
*******************************************************************
1. Type employee number with a leading `E' or `C'
2. Type your password (6 to 8 characters only)
3. Press the ENTER key
NOTE: You will be prompted to change your password every 30 days.
1. Type employee number with leading `E' or `C'
2. Type your password
3. Type your new password
4. Retype your new password
5. Press the ENTER key
1. For JAI Menu, key /FOR JIOPMENU
2. For Superior Court Menu, key /FOR JIOPCCMU
3. Press the ENTER key.
